Popular Demand (PTU)

Go down

Popular Demand (PTU) Empty Popular Demand (PTU)

Post by ♦Aqua♦ on Sun Jun 13, 2010 8:55 pm

This is the tag we'll be making and what you'll need:

• Flyaway scrapkit made by the talented Bastelgalaxy, check her blog here for places it's sold at.

• I used 2 tubes I had purchased at Barb Jensen's site. Please do not use this artist's work without a proper license to do so.

• Template 352 I used was by Missy, please go to her blog to get it. Thank you so much Missy!

• I used a mask 2 from Melissa, please check out the masks there, they are awesome!

• Now anyone that has done my tuts knows I LOVE filters, and in this one I used: Mura Meisters Cloud, Super Blade Pro (coconut ice setting), Eye Candy 4000 Glass, Eye Candy 4000 Gradient Glow, Eye Candy 5 Perspective Shadow, and Xero Porcelain.

• Font used was P22 Oh Ley which I cannot share, but any font of your choice will work nicely.

Okay ready, let's go tag something purdy!

• Open up Missy's fabulous template, duplicate the original so that you can re-use again later. I changed the canvas size to 750 x 650 so we've got lots of room to work. Unhide the bottom background and flood fill white again. Delete the credits layer labeled by Missy. As her templates are already in 72 dpi no need to change that even if using PTU tubes woohooo! Okay let's get started!

• On Rectangle layer, select all, float, defloat, invert selections and paste paper of choice as a new layer (I used paper 28) and I re-sized the layer by about 85% and when happy with how it looks, press delete and select none. Delete the original Rectangle layer.

• On Glittered Circle layer, I changed the white color to a dark green color in the kit by using the manual color correction tool. Choosing a lighter color as the source and then on the target you want to have it the color you want it to end in, I chose code of #229e97, but use whatever your preference is for the tag you are making.

• On Large Circle layer, select all, float, defloat, add a new layer and on that new layer paste paper of choice into selection. I used paper 32 and then select none and delete the original Large Circle layer. Do the same with the Med Circle layer, this time I used paper 31. Complete these steps again on the Small Circle layer and that time I used paper 2.

• On Thin Rectangle 1 layer, change the color to a coordinating color in the tag. I changed the pink color to a teal color (code #229e97 again) just like before. I then applied Eye Candy 4000 Glass to this layer with the settings posted below. Do the same steps with Rectangle 2, 3, and 4 with the differing colors on 3 & 4. See my tag for reference.
Popular Demand (PTU) PD_Glass1-vi

• The wordart piece, you can colorize these nicely to your liking however you want but I use my magic wand to select as I go. So with your magic wand, I had mine at tolerance about 25 and feather of 0 and selected all of the black text and one exclamation point, once all are selected, I applied Super Blade Pro (coconut ice setting). I found it wasn't as shiny as I wanted so I applied Eye Candy 4000 Glass also with the same settings as above however changed the teal color to be black. You may need to play around with the 3rd tab (bevel profile) settings, use whatever you think works best. Select none. On the pink exclamation point, I used manual color correction to change the pink color to a teal color and also applied Super Blade Pro to that item. With the word "BY" I changed the pink color to a teal color, applied a nice inner bevel setting. Finally on the aqua colored hearts, I changed the color again with manual color correction tool from the aqua (source) to purple (target) and with them still selected, applied Super Blade Pro (once again with the coconut ice setting). Select none and finally, I selected the the white gradient glow that is around all of the text. Once all selected, I applied noise with the following settings:
Popular Demand (PTU) PD_AddNoise1-vi

• Okay now let's put some gradient glow around some of the edges. I applied gradient glow to all my teal layers one like this one posted below. Settings on first tab were 4, 25, 100. Use whatever works best for your tag though. Then on the purple layers, I basically reversed the colors on the gradient glow.
Popular Demand (PTU) PD_GradGlow1-vi

• Okay we gotta do something with those photo frames yet. On the polaroid on left, I used magic wand to select the white portion and then changed the color to a nice purple color using the manual color correction tool. With everything selected yet, I applied Mura Meisters Cloud with the following settings:
Popular Demand (PTU) PD_Cloud1-vi

Select none if happy and then do the same with the other polaroid frame doing teal instead of purple. See my tag for reference. Now time to place our tubes in there of course. Using magic wand tool select inside part, invert selections and contract by 1. I do this because when we erase parts of the tube layer, it looks more seamless that way. Paste tube as new layer and arrange to your liking, re-size if necessary. Once happy with placing, grab your eraser tool and erase the bits that hang over on the bottom. Select none, duplicate tube and apply gaussian blur of 5 and change blend mode to soft light. On the bottom tube apply Xero Porcelain with the default settings. Repeat these steps on the other frame.

• Re-size your image to what you want your ending tag to be and add any elements of choice and re-sizing and positioning as you like. If you are using same kit I did there are LOADS of fabulous elements in there. At this point I also applied my drop shadows using Eye Candy 5 Perspective Shadow but if you don't have that filter, the drop shadow feature in PSP works just great as well. On the background layer, add a new layer. In your material palette create a gradient from your 2 main colors of the tag and flood fill on that new blank layer and apply Melissa's mask, merge layer group. I used my deform tool to stretch it just a little.

• Add the artist's copyright and your tagger's watermark to the tag and then of course your text. I used P22 Oh Ley but if you don't have that font, just use your fave scripty font of choice. Hide white background layer and save as a png and voila you're all done! I hope you've enjoyed my tutorial.

This tutorial was written by Tonya on June 13, 2010 and absolutely no part of this tutorial may be taken or used without my express permission. Any similarities to any other tutorial is purely coincidental.

Scrap kit by Bastel Galaxy


Posts : 149
Join date : 2009-12-07
Age : 49
Location : Southern Indiana


Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum